Projects We Install
Fixtures
Toilets, sinks, tubs, showers, faucets and appliance connections.
Remodel rough in
New bathrooms, kitchens and basement finishes need supply lines, drains and vents.
New lines
Outdoor spigots, laundry hookups and extra bathrooms.
Gas appliance hookups
Ranges, dryers, fireplaces and water heaters connected with the right line size.
A good install begins with the plan. We ask what the space will be used for before we touch a pipe.
Common ProjectBasement And Remodel Plumbing
Finishing a basement in Lehi often means adding a bathroom or wet bar. The drain has to slope, vent and tie into the main, and a floor may need to be broken. If the basement is below the sewer line, an ejector pump may be part of the plan.
We map the existing lines first so the new work fits. We also check how the project changes load on the main drain.
Hidden PiecesVents Matter More Than People Think
| Piece | What it does | What goes wrong |
|---|---|---|
| Drain slope | Moves waste away by gravity | Too flat slows flow, too steep leaves solids |
| Vent pipe | Lets air in so drains flow and traps stay sealed | Missing or blocked vents cause gurgling |
| Trap | Holds water to block sewer gas | Dry traps let gas into the room |
| Shutoff valves | Lets you isolate one fixture | Missing valves make repairs harder |
A fixture can look right and still drain badly if the venting is wrong. Our install scope lists each piece so nothing is skipped.
Gas LinesGas Line Work Starts With Safety
If you smell gas
- Leave the building right away
- Do not use switches, phones or open flames inside
- Call 911 and the gas utility, Enbridge Gas lists 1-800-767-1689
- Wait outside until the building is cleared
Gas line work covers new appliance hookups, line extensions and size checks for tankless water heaters. We confirm the load and the line size before quoting. Conversions between gas types need appliance specific parts, and we explain what that involves.
Planning New Fixtures Or A Remodel?
Call and we will talk through the scope and set a visit.
Permits And Inspections In Lehi
Lehi Building and Inspections takes permit applications through an online portal. Inspections are scheduled by phone at (385) 201-1035 with 24 hours notice. We confirm what your project needs and tell you what to expect before work begins.
Utah adds statewide amendments to the plumbing code, and backflow assemblies have their own testing rules. For commercial jobs, see commercial plumbing.
PricingPricing For Installations
Planning An Install Before The Plumber Arrives
Have the fixture on site before the visit and keep the box and the paper instructions. The model number tells us the rough in size, the water connections and what parts are included. A toilet, for example, has a rough in distance from the wall to the drain center, and the new one has to match the old one.
Clear the area under sinks and around the water heater, and tell us where the main shutoff is. Open access saves time and keeps the price down. If a fixture sits in a tight cabinet, mention it on the phone so the plumber brings the right tools.
An install is a good moment to replace old shutoff valves and braided supply lines. Those parts cost little compared with the damage a failed line can cause. We list them in the price before work begins so you can decide.
New fixtures and supply lines are installed to the International Plumbing Code (IPC) with Utah amendments. If your project needs a permit, the city building office is the place to ask.
FAQsPlumbing Installation Questions
Yes. Call and tell us the models so we can confirm fit, rough in size and any parts needed.
Yes. We handle rough in for bathrooms, kitchens and basements, and we work with your contractor or on our own.
Yes. We connect appliances and size lines for tankless units. If you smell gas, leave the building and call 911 and the gas utility first.
We confirm what the job needs with Lehi Building and Inspections and explain the steps before work starts.
Often yes. The drain slope, venting and main connection decide the plan, and an ejector pump may be needed.
Call and describe the project. We will schedule a visit and give a written scope and clear price.

